Product ID:METEC 2060C
MSDS Date:03/09/1993
FSC:3439
NIIN:01-386-0313
MSDS Number: BYHCL

METALLURGICAL TECHNOLOGIES,INC

14435 MAX ROAD
PEARLAND, TX 77581
US

Emergency Phone: 713-485-7765

Info Phone: 713-485-7765

Cage: 63726

METALLURGICAL TECHNOLOGIES,INC

PEARLAND, TX 77581 US

Telephone: 713-485-7765

Cage: 63726

COBALT

CAS: 7440-48-4

RTECS: GF8750000

Fraction By Weight: 16.6%

OSHA PEL 0.1 MG/M3

ACGIH TLV: 0.1 MG/M3

CHROMIUM

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 45.6%

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

NICKEL

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 27.8%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3

MOLYBDENUM

CAS: 7439-98-7

RTECS: QA4680000

Fraction By Weight: 1.8%

OSHA PEL 10 PPM.

ACGIH TLV: 10 PPM.

IRON

CAS: 7439-89-6

RTECS: NO4565500

Fraction By Weight: 0.30%

ALUMINUM

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: 2.0%

ACGIH TLV: 10 MG/M3

CARBON

CAS: 14762-74-4

Fraction By Weight: 6.0%

BORON

CAS: 7440-42-8

RTECS: ED7350000

Fraction By Weight: 0.9%

OSHA PEL 10 MG B203/M3

ACGIH TLV: 10 MG B2O3/M3

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHALATION: ACUTE-BRONCHITIS.
CHRONIC-SIDEROSIS. EYE CONTACT: ACUTE-MECHANICAL IRRITATION.
CHRONIC-CONJUNCTIVITIS.
Explanation of Carcinogenicity:NTP HAS LISTED NICKEL & NICKEL OXIDE AS
POSSIBLE CANVER HAZARDS. IARC HAS DETERMINED CHROMIUM AS A 'CASUAL'
HUMAN CANCER
Effects of Overexposure:HEAVY DUST LOAD MAY CAUSE DIFFICULTY IN
BREATHING.
Medical Cond Aggravated by Exposure:SEE ABOVE.

First Aid:EYE CONTACT-FLUSH IMMEDIATELY WITH LARGE AMOUNTS OF WATER. DO
NOT RUB EYES. OBTAIN MEDICAL ATTENTION IF IRRITATION PERSISTS.

Extinguishing Media:DRY CHEMICAL, DRY SAND OR GRAPHITE TO SMOTHER FIRE.
USE WATER ONLY IN MIST/FOG APPLICATION TO AVOID SPREADING POWDER.
Fire Fighting Procedures:FIREFIGHTERS SHOULD USE SELF-PROTECTIVE
CLOTHING AND EQUIPMENT.
Unusual Fire/Explosion Hazard:NOT CONSIDERED FLAMMABLE UNDER MOST
CONDITIONS. AVOID AIRBORN DISPERSION OF ANY FINE DIVIDED POWDER ON
AN ENCLOSED INDUSTRIAL AREA TO REDUCE POTENTIAL FOR IGNIT

Spill Release Procedures:AVOID GENERATION OF AIR BORNE DUST. WHERE
POSSIBLE USE VACUUM SUCTION TO CLEAR SPILLED MATERIAL. USE HIGH
EFFICIENCY PARTICULATE ARRESTING (HEPA) FILTER IF THE VACCUME
EXHAUST IS DISCHARGED INTO WORK PLACE. USE DUST SUPPRESSENT WHERE
SWEEPING IN NEED
Neutralizing Agent:NA

Handling and Storage Precautions:KEEP IN CLOSED CONTAINERS. DO NOT
STORE NEAR STRONG OXIDIZERS. USE GOOD HOUSEKEEPING PRACTICES TO
PREVENT ACCUMULATION OF DUST.
Other Precautions:NONE

Respiratory Protection:USE NIOSH APPROVED DUST RESPIRATOR SELECTED
ACCORDING TO OSHA 29 CFR 1910.134.
Ventilation:LOCAL EXHAUST-USE ADEQUATE VENTILATION.
Protective Gloves:YES
Eye Protection:WEAR SAFETY GLASSES.
Other Protective Equipment:YES TO AVOID EXCESSIVE SKIN CONTACT.
Work Hygienic Practices:AVOID DUSTING - USE GOOD VENTILATION.
Supplemental Safety and Health
NONE

HCC:N1
Solubility in Water:INSOLUBLE.
Appearance and Odor:GREY COLOR FINE POWDER, NO ODOR.

Stability Indicator/Materials to Avoid:YES
PURE OXYGEN OR OTHER STRONG OXIDIZERS.
Stability Condition to Avoid:GENERATION OF AIRBORNE DUST.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.